Description
The Frymaster FPRE117 is a high-efficiency electric fryer system engineered for commercial kitchens that require dependable production capacity, integrated oil management, and consistent frying performance. Built around Frymasters RE17 platform, the FPRE117 combines a 50 lb. open-pot fryer with a space-saving built-in filtration system designed to improve oil longevity, reduce labor requirements, and maintain consistent product quality during high-volume operation.
The fryer utilizes proprietary self-standing, swing-up, flat-bar, low-watt density heating elements that provide efficient heat transfer while supporting easier maintenance access and long service life. Its RTD 1° compensating temperature probe continuously responds to cooking load variations, helping maintain accurate oil temperatures and minimizing temperature overshoot that can shorten oil life. A deep cold zone and rear oil flush system further assist with sediment removal, preserving oil quality and simplifying daily cleaning procedures.
The integrated filtration system is designed directly into the fryer battery cabinet, allowing filtration cycles to be completed in less than five minutes while neighboring frypots remain operational. The system includes a large-capacity filter pan, stainless steel crumb catcher, 1/3 H.P. filter motor, and 4 GPM pump for efficient oil circulation and maintenance. ENERGY STAR® qualification and ASTM energy efficiency ratings exceeding 83% make the FPRE117 suitable for operators seeking reduced utility consumption and lower long-term operating costs.
With stainless steel construction, programmable CM3.5 controls, boil-out mode, melt cycle functionality, and optional accessories such as basket lifts and spreader cabinets, the FPRE117 is well suited for quick-service restaurants, institutional foodservice, convenience stores, and high-output commercial frying applications.
Key Features
High-efficiency electric fryer with built-in filtration system
50 lb. open-pot frypot design
Proprietary self-standing, swing-up, flat-bar heating elements
ASTM energy efficiency ratings greater than 83%
ENERGY STAR® qualified fryer platform
Built-in filtration system with 4 GPM pump
Large-capacity filter pan with stainless crumb catcher
RTD 1° compensating temperature probe
Deep cold zone and rear oil flush system
CM3.5 controller with melt cycle and boil-out mode
Stainless steel frypot, cabinet, and door construction
Full-port ball-type drain valve
Casters included standard
Optional automatic basket lifts, external oil discharge, and spreader cabinet.
Commercial Insights
The Frymaster FPRE117 delivers a strong balance of energy efficiency, integrated oil management, and production consistency for operators seeking a compact fryer system with built-in filtration capabilities. Compared to standard electric fryers, its high-efficiency heating elements, advanced temperature compensation, and rapid filtration process significantly improve oil longevity and operational throughput while reducing downtime and utility costs. The built-in filtration cabinet enhances workflow efficiency in high-volume kitchens, making the FPRE117 especially valuable for quick-service restaurants, institutional operations, and chain environments where oil management, labor savings, and consistent product quality are operational priorities.
| Capacity & Frying Area | Oil Capacity | 50-lbs. (25 L) per full frypot |
| Frying Area | 14 × 15-1/2 (35.6 × 39.4 cm) | |
| Pot Type | Open frypot | |
| Frypot Configuration | Full frypot | |
| Performance & Electrical | Power Input | 17 kW |
| Voltage Options | 208V, 240V, 480V domestic; 220/380V, 230/400V, 240/415V export | |
| Nominal Amps (3 Phase) | 48A @208V; 41A @240V; 21A @480V | |
| Controller | CM3.5 controller | |
| Filtration System | Built-in filtration with 1/3 H.P. motor and 4 GPM pump | |
| Construction & Operation | Heating Elements | Proprietary self-standing, swing-up, flat-bar, low-watt density elements |
| Temperature System | RTD 1° compensating temperature probe | |
| Oil Management | Deep cold zone with rear oil flush | |
| Drain Valve | 1-1/4 (3.2 cm) IPS full-port ball-type drain valve | |
| Construction | Stainless steel frypot, door, and cabinet | |
| Dimensions & Shipping | Width | 15-5/8 (39.7 cm) |
| Depth | 31 (78.6 cm) | |
| Height | 45-3/8 (115.2 cm) | |
| Drain Height | 14 (35.6 cm) | |
| Shipping Weight | 277 lbs. (126 kg) | |
| Shipping Dimensions | 22 W × 36 D × 54 H | |
| Shipping Class | 85 |





Reviews
There are no reviews yet.